Xerox D136 User Manual

2. Open the right cover on the finisher.
3. Grasp the Staple Cartridge handle located at R1, and pull out the staple cartridge
from the finisher.
4. Check the inside of the finisher for any remaining staples, and if necessary, remove
them.
5. Open the staple cartridge unit as shown and remove the jammed staple.
Warning
To avoid injury to your fingers, carefully remove the jammed staples from the
cartridge.
User Guide24-36
Standard Finisher Plus

Xerox D136 Specifications

General

Brand	Xerox
Model	D136
Category	Copier
Language	English