Yamaha F100B - Removing the Drive Shaft; Disassembling the Drive Shaft Housing; Disassembling the Forward Gear

LOWR
Lower unit
6-17
60C5D11
Removing the drive shaft
1. Remove the drive shaft assembly and
pinion, and then pull out the forward
gear.
Disassembling the drive shaft
housing
1. Remove the cover, oil seals, and needle
bearing.
Disassembling the forward gear
1. Remove the taper roller bearing from the
forward gear using a press.
CAUTION:
Do not reuse the bearing, always replace
it with a new one.
2. Remove the needle bearing from the for-
ward gear.
CAUTION:
Do not reuse the bearing, always replace
it with a new one.
Drive shaft holder 5
1
: 90890-06519
Pinion nut holder
2
: 90890-06505
Socket adapter 2
3
: 90890-06507
Needle bearing attachment
1
:
90890-06610
Driver rod L3
2
: 90890-06652
S60C6190
Bearing separator
1
: 90890-06534
Bearing inner race attachment
2
:
90890-06641
Stopper guide plate
3
: 90890-06501
Stopper guide stand
4
:
90890-06538
Bearing puller
5
: 90890-06535
Bearing puller claw 1
6
:
90890-06536
S60C6200