60C5D11
6-40
1
2
3
4
5
6
7
8
9
Disassembling the propeller shaft
assembly
1. Remove the spring
1
, and then remove
the cross pin
2
, dog clutch
3
, slider,
and shift plunger
4
.
Checking the propeller shaft housing
1. Clean the propeller shaft housing using a
soft brush and cleaning solvent, and then
check it for cracks. Replace if necessary.
2. Check the teeth and dogs of the reverse
gear for cracks or wear. Replace the
gear if necessary.
3. Check the bearings for pitting or rum-
bling. Replace if necessary.
Checking the propeller shaft
1. Check the propeller shaft for bends or
wear. Replace if necessary.
Needle bearing attachment
0
:
90890-06612
Driver rod L3
A
: 90890-06652
S60C6125
S60C6130
Propeller shaft housing (F100C)
To Next Page
Loading...
Need help?
General
