MP-1xx SIP
MP-1xx SIP User’s Manual 126 Document #: LTRT-65404
Figure 5-37: TelIP Call Counters Screen
Table
5-37: Call Counters Description (continues on pages 126 to 127)
Counter Description
Number of Attempted
Calls
This counter indicates the number of attempted calls.
It is composed of established and failed calls. The number of established calls is
represented by the ‘Number of Established Calls’ counter. The number of failed
calls is represented by the five failed-call counters. Only one of the established /
failed call counters is incremented every time.
Number of Established
Calls
This counter indicates the number of established calls. It is incremented as a result
of one of the following release reasons, if the duration of the call is bigger then
zero:
GWAPP_REASON_NOT_RELEVANT (0)
GWAPP_NORMAL_CALL_CLEAR (16)
GWAPP_NORMAL_UNSPECIFIED (31)
And the internal reasons:
RELEASE_BECAUSE_UNKNOWN_REASON
RELEASE_BECAUSE_REMOTE_CANCEL_CALL
RELEASE_BECAUSE_MANUAL_DISC
RELEASE_BECAUSE_SILENCE_DISC
RELEASE_BECAUSE_DISCONNECT_CODE
Note: When the duration of the call is zero, the release reason
GWAPP_NORMAL_CALL_CLEAR increments the ‘Number of Failed Calls due to
No Answer’ counter. The rest of the release reasons increment the ‘Number of
Failed Calls due to Other Failures’ counter.
Number of Failed Calls
due to a Busy Line
This counter indicates the number of calls that failed as a result of a busy line. It is
incremented as a result of the following release reason:
GWAPP_USER_BUSY (17)
Number of Failed Calls
due to No Answer
This counter indicates the number of calls that weren’t answered. It is incremented
as a result of one of the following release reasons:
GWAPP_NO_USER_RESPONDING (18)
GWAPP_NO_ANSWER_FROM_USER_ALERTED (19)
And (when the call duration is zero) as a result of the following:
GWAPP_NORMAL_CALL_CLEAR (16)
RELEASE_BECAUSE_NORMAL_CALL_DROP (internal)
Number of Failed Calls
due to No Route
This counter indicates the number of calls whose destinations weren’t found. It is
incremented as a result of one of the following release reasons:
GWAPP_UNASSIGNED_NUMBER (1)
GWAPP_NO_ROUTE_TO_DESTINATION (3)