MP-1xx SIP User’s Manual 2. MP-1xx Physical Description
Version 4.4 21 March 2005
2 MP-1xx Physical Description
This section provides detailed information on the MP-1xx hardware, the location and functionality
of the LEDs, buttons and connectors on the front and rear panels.
For detailed information on installing the MP-1xx refer to Section
3 on page 25.
2.1 MP-1xx Front Panel
Figure 2-1 and Figure 2-2 illustrate the front layout of the MP-108 (almost identical on MP-104
and MP-102) and MP-124 respectively. Refer to Section
2.1.1 for meaning of the front panel
buttons; refer to Section
2.1.2 for functionality of the front panel LEDs.
Figure
2-1: MP-108 Front Panel
Figure
2-2: MP-124 Front Panel
2.1.1 MP-1xx Front Panel Buttons
Table 2-1 lists and describes the front panel buttons on the MP-1xx.
Table
2-1: Front Panel Buttons on the MP-1xx
Type Function Comment
Reset the MP-1xx
Press the reset button with a paper clip or any other similar
pointed object, until the gateway is reset.
Reset button
Restore the MP-1xx parameters to
their factory default values
Refer to Section
4.2 on page 36.
Reset Button
Reset Button
To Next Page
Loading...
Need help?
General
