AudioCodes MP-100 User Manual

MP-1xx SIP
MP-1xx SIP User’s Manual 230 Document #: LTRT-65404
Table G-3: acBoardCallResourcesAlarm Alarm Trap
Alarm:
acBoardCallResourcesAlarm
OID:
1.3.6.1.4.1.5003.9.10.1.21.2.0.8
Default Severity
Major
Event Type:
processingErrorAlarm
Probable Cause:
softwareError (46)
Alarm Text:
Call resources alarm
Status Changes:
Condition: Number of free channels exceeds the predefined RAI high threshold.
Alarm Status: Major
Note: To enable this alarm the RAI mechanism must be activated (EnableRAI = 1).
Condition: Number of free channels falls below the predefined RAI low threshold.
Alarm Status: Cleared
Table G-4: acBoardControllerFailureAlarm Alarm Trap
Alarm:
acBoardControllerFailureAlarm
OID:
1.3.6.1.4.1.5003.9.10.1.21.2.0.9
Default Severity
Minor
Event Type:
processingErrorAlarm
Probable Cause:
softwareError (46)
Alarm Text:
Controller failure alarm
Status Changes:
Condition: Proxy has not been found
Alarm Status: Major
Additional Info: Proxy not found. Use internal routing
or
Proxy lost. looking for another Proxy
Condition: Proxy is found.
The clear message includes the IP address of the located Proxy.
Alarm Status: Cleared
Table G-5: acBoardOverloadAlarm Alarm Trap
Alarm:
acBoardOverloadAlarm
OID:
1.3.6.1.4.1.5003.9.10.1.21.2.0.11
Default Severity
Major
Event Type:
processingErrorAlarm
Probable Cause:
softwareError (46)
Alarm Text:
Board overload alarm
Status Changes:
Condition: An overload condition exists in one or more of the system components.
Alarm Status: Major
Condition: The overload condition passed
Alarm Status: Cleared

AudioCodes MP-100 Specifications

General

Brand	AudioCodes
Model	MP-100
Category	Gateway
Language	English