AudioCodes MP-100 User Manual

MP-1xx SIP
MP-1xx SIP User’s Manual 22 Document #: LTRT-65404
2.1.2 MP-1xx Front Panel LEDs
Table 2-2 lists and describes the front panel LEDs on the MP-1xx.
Note: MP-1xx (FXS/FXO) media gateways feature almost identical front panel
LEDs; they only differ in the number of channel LEDs that correspond to the
number of channels.
Table 2-2: Indicator LEDs on the MP-1xx Front Panel
Label Type Color State Function
Green ON
Device Powered, self-test OK
Orange Blinking
Software Loading/Initialization
Ready
Device Status
Red ON
Malfunction
Green ON
Valid 10/100 Base-TX Ethernet connection
LAN
Ethernet Link
Status
Red ON
Malfunction
Green Blinking
Sending and receiving SIP messages
Control
Control Link
Blank
No traffic
Green Blinking
Transmitting RTP (Real-Time Transport Protocol)
Packets
Red Blinking
Receiving RTP Packets
Data
Packet Status
Blank -
No traffic
Offhook / Ringing for FXS Phone Port
Green ON
FXO Line-Seize/Ringing State for Line Port
Green Blinking
There’s an incoming call, before answering
Red ON
Line Malfunction
Channels
Telephone
Interface
Blank -
Normal
2.2 MP-1xx Rear Panel
2.2.1 MP-10x Rear Panel
Figure 2-3 illustrates the rear panel layout of the MP-104. For descriptions of the MP-10x rear
panel components, refer to Table
2-3. For the functionality of the MP-10x rear panel LEDs, refer
to Table
2-4.
Tip 1: MP-10x (FXS/FXO) media gateways feature almost identical rear panel
connectors and LEDs, located slightly differently from one device to the next.
Tip 2: The RJ-45 port (Eth 1) on the MP-10x/FXO rear panel is inverted on the MP-
1xx/FXS. The label on the rear panel also distinguishes FXS from FXO
devices.

AudioCodes MP-100 Specifications

General

Brand	AudioCodes
Model	MP-100
Category	Gateway
Language	English