EasyManuals Logo
Home>AudioCodes>Gateway>MP-100

AudioCodes MP-100 User Manual

AudioCodes MP-100
238 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
MP-1xx SIP User’s Manual 5. Configuring the MP-1xx
Version 4.4 39 March 2005
5 Configuring the MP-1xx
5.1 Configuration Concepts
Users can utilize the the MP-1xx in a wide variety of applications, enabled by its parameters and
configuration files (e.g., Call Progress Tones (CPT), etc.). The parameters can be configured and
configuration files can be loaded using:
A standard Web Browser (described and explained in this section).
A configuration file referred to as the ini file. For information on how to use the ini file refer to
Section
6 on page 141.
An SNMP browser software (refer to Section
11 on page 179).
AudioCodes’ Element Management System (EMS) (refer to Section
11.8 on page 190 and to
AudioCodes’ EMS User’s Manual or EMS Product Description).
To upgrade the MP-1xx (load new software or configuration files onto the gateway) use the
Software Upgrade wizard, available through the Web Interface (refer to Section
5.11.1 on page
131), or alternatively use the BootP/TFTP configuration utility (refer to Section
10.3.1 on page
176).
For information on the configuration files refer to Section
6 on page 141.
5.2 Overview of the Embedded Web Server
The Embedded Web Server is used both for gateway configuration, including loading of
configuration files, and for run-time monitoring. The Embedded Web Server can be accessed
from a standard Web browser, such as Microsoft™ Internet Explorer, Netscape™ Navigator, etc.
Specifically, Users can employ this facility to set up the gateway configuration parameters. Users
also have the option to remotely reset the gateway and to permanently apply the new set of
parameters.
5.3 Computer Requirements
To use the Web Interface, the following is needed:
A computer capable of running your Web browser.
A network connection to the VoIP gateway.
One of the following compatible Web browsers:
Microsoft™ Internet Explorer™ (version 6.0 and higher).
Netscape™ Navigator™ (version 7.0 and higher).
Note: Some Java-script applications are not supported in Netscape.

Table of Contents

Other manuals for AudioCodes MP-100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes MP-100 and is the answer not in the manual?

AudioCodes MP-100 Specifications

General IconGeneral
BrandAudioCodes
ModelMP-100
CategoryGateway
LanguageEnglish

Related product manuals