MP-1xx SIP
MP-1xx SIP User’s Manual 138 Document #: LTRT-65404
Figure 5-49: Auxiliary Files Screen
5.11.2.1 Loading the Auxiliary Files via the ini File
To load the auxiliary files via the ini file, take these 3 steps:
1. In the ini file, define the auxiliary files to be loaded to the MP-1xx. You can also define in the
ini file whether the loaded files should be stored in the non-volatile memory so that the TFTP
process is not required every time the MP-1xx boots up.
2. Locate the auxiliary files you want to load and the ini file in the same directory.
3. Invoke a BootP/TFTP session; the ini and auxiliary files are loaded onto the MP-1xx.
Table
5-39 below describes the ini file parameters that are associated with the configuration files.
Table 5-39: Configuration Files ini File Parameters
ini File Parameter Name Description
CallProgressTonesFileName
The name (and path) of the file containing the Call Progress Tones
definition.
FXSLoopCharacteristicsFileName
The name (and path) of the file providing the FXS line characteristic
parameters.
FXOLoopCharacteristicsFileName
The name (and path) of the file providing the FXO line characteristic
parameters.
PrerecordedTonesFileName
The name (and path) of the file containing the Prerecorded Tones.
SaveConfiguration
Set to 1 to store the Call Progress Tones, PRT and coefficient files in the
non-volatile memory.
To Next Page
Loading...
Need help?
General
