EasyManuals Logo
Home>Cisco>IP Phone>7925G

Cisco 7925G User Manual

Cisco 7925G
176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #123 background imageLoading...
Page #123 background image
Keypad Automatic Lock
To keep from pressing keys and redialing calls accidentally, use the Keypad Auto Lock feature. You can set
the length of time before your phone keypad automatically locks after you end a call.
Tips
Auto lock is enabled only when the phone is idle and at the main screen.
The keypad lock is temporarily disabled when you have an incoming call.
Automatically Lock Keypad After Using Phone
Procedure
Step 1
Choose > Phone Settings > Keypad Settings.
Step 2
Select Keypad Auto Lock.
Step 3
Select one of these time intervals:
15 seconds
30 seconds
60 seconds
Step 4
Press Save to make the change or press Cancel.
After the chosen time interval expires, the icon appears and the keypad locks.
Unlock Keypad
Procedure
Step 1
Press any key and Unlock keypad? appears on the screen.
Step 2
Press Unlock and then press OK. You must press the softkeys as soon as they appear, or the keypad remains
locked.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
101
Phone Customization
Keypad Automatic Lock

Table of Contents

Other manuals for Cisco 7925G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7925G and is the answer not in the manual?

Cisco 7925G Specifications

General IconGeneral
Keypad number of keys12
Display diagonal2 \
Display resolution176 x 220 pixels
Call waitingYes
Lines quantity6 lines
Voice codecsG.711a, G.722, G.729a, iLBC
Security algorithms128-bit WEP, SSL/TLS, WPA
Supported network protocolsDHCP, TFTP, DNS, SCCP, SRST
Input voltage100 - 240 V
Dimensions (WxDxH)52 x 20 x 127 mm
Minimum system requirementsCisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency50/60 Hz
Storage temperature (T-T)-30 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Product typeIP Phone
Product colorGray
SafetyUL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e
Weight and Dimensions IconWeight and Dimensions
Weight138 g

Related product manuals