Cisco 7925G User Manual

Call Park
Use the Park softkey to store the call. Your phone displays the call park number to identify your call.
You must record this number and then use the same number to retrieve the call.
Directed Call Park
Use the Transfer softkey to direct the call to an available directed call park number that you dial or
speed dial. To retrieve the call from a directed call park number, dial the park retrieval prefix, and then
dial or speed dial the same directed call park number. You can use a speed-dial as the directed call park
number and to monitor whether a directed call park number is occupied or available. For information
about the available directed call park numbers, contact your system administrator.
Tip
You have a limited time to retrieve a parked call before it reverts to ringing at the original number. For
information on the length of time, contact your system administrator.
Store and Retrieve Active Call Using Call Park
Procedure
Step 1
During a call, choose Options > Park.
Step 2
Note the call park number that appears on your phone screen.
Step 3
Press .
Step 4
Enter the call park number from any Cisco Unified IP Phone in your network to connect to the call.
Direct, Store, and Retrieve Active Call at Directed Call Park Number
Procedure
Step 1
During a call, press Transfer.
Step 2
Choose a speed-dial number with a park-unoccupied icon to speed dial the directed call park number.
A speed-dial number with park-occupied icon indicates the directed call park number is not available.
If BLF is not configured for the speed-dial number, the icon does not show whether the directed call
park number is available or not.
Note
Step 3
Press Transfer again to finish storing the call.
Step 4
From any Cisco Unified IP Phone in your network, enter the park retrieval prefix and dial the directed call
park number.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
61
Calling Features
Store and Retrieve Active Call Using Call Park

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g