Cisco 7925G User Manual

AutoAnswer
You can use AutoAnswer if you receive a high volume of incoming calls or handle calls on behalf of others.
Your system administrator configures AutoAnswer to work with either your speaker or headset.
If AutoAnswer is configured, keep headset mode active by ensuring that your headset is plugged into the
phone, even when you are not on a call.
If your phone is set up to use AutoAnswer in headset mode, calls are answered automatically only if the Wired
Headset icon or the Bluetooth Enabled icon is in the phone status line. Otherwise, calls ring normally
and you must manually answer them.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
113
Handset, Headset, and Speakerphone
AutoAnswer

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g