Cisco 7925G User Manual

Use Quality Reporting Tool
Your system administrator may temporarily configure your phone with the Quality Reporting Tool (QRT) to
troubleshoot performance problems. Depending on configuration, use the QRT to:
•
Immediately report an audio problem on the current call.
•
Select a general problem from a list of categories and choose reason codes.
Procedure
Choose Options > QRT.
Cisco Unified Wireless IP Phone 7925G Desktop Charger
Problems
This section provides information to help you troubleshoot Cisco Unified Wireless IP Phone 7925G Desktop
Charger problems.
Power/Bluetooth Status LED
This section describes situations that are identified by the Power/Bluetooth Status LED. Under normal
circumstances, the Power/Bluetooth Status LED lights green, which indicates that the Cisco Unified Wireless
IP Phone 7925G Desktop Charger is plugged into line power.
Power/Bluetooth Status LED Unlit
Problem
The Power/Bluetooth Status LED is unlit.
Cause
The Cisco Unified Wireless IP Phone 7925G Desktop Charger is not plugged into line power. If the Battery
LED is also unlit, you cannot use the Cisco Unified Wireless IP Phone 7925G Desktop Charger.
Solution
Plug the charger into line power.
Power/Bluetooth LED Flashes Blue
Problem
The Power/Bluetooth Status LED is flashing blue.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
144
Troubleshooting
Use Quality Reporting Tool

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g