EasyManuals Logo
Home>Cisco>IP Phone>7925G

Cisco 7925G User Manual

Cisco 7925G
176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #145 background imageLoading...
Page #145 background image
The Battery LED lights green if the battery is charged, or red if the battery is charging.
Step 2
If the Battery LED does not light up as red or green, check that the battery was installed correctly (label side
up). You may need to remove the battery, reorient it, and reinsert it firmly against the contacts.
Cisco Unified Wireless IP Phone 7925G Desktop Charger Notes
Unplugging the Cisco Unified Wireless IP Phone 7925G Desktop Charger from the electrical outlet has the
following consequences:
As long as a charged spare battery is in place, the station functions normally. The spare battery provides
power for the speakerphone.
When the Battery LED starts flashing amber-yellow, the charge on the spare battery is low. Active
calls continue and new calls can be placed, as long as there is sufficient power in the spare battery.
When the spare battery power is low, the speakerphone does not operate, but calls can continue.
When the Battery LED flashes amber-yellow and dims, the spare battery charge has dropped too
low. Active calls disconnect and new calls cannot be placed. The Cisco Unified Wireless IP Phone
7925G Desktop Charger should be connected to an electrical outlet or a charged spare battery
installed.
If an uncharged spare battery is in place, the station does not function. The Cisco Unified Wireless IP
Phone 7925G Desktop Charger must be plugged into an electrical outlet, or a charged spare battery
installed.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
123
Cisco Unified Wireless IP Phone 7925G Desktop Charger
Cisco Unified Wireless IP Phone 7925G Desktop Charger Notes

Table of Contents

Other manuals for Cisco 7925G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7925G and is the answer not in the manual?

Cisco 7925G Specifications

General IconGeneral
Keypad number of keys12
Display diagonal2 \
Display resolution176 x 220 pixels
Call waitingYes
Lines quantity6 lines
Voice codecsG.711a, G.722, G.729a, iLBC
Security algorithms128-bit WEP, SSL/TLS, WPA
Supported network protocolsDHCP, TFTP, DNS, SCCP, SRST
Input voltage100 - 240 V
Dimensions (WxDxH)52 x 20 x 127 mm
Minimum system requirementsCisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency50/60 Hz
Storage temperature (T-T)-30 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Product typeIP Phone
Product colorGray
SafetyUL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e
Weight and Dimensions IconWeight and Dimensions
Weight138 g

Related product manuals