Cisco 7925G User Manual

Place Call Using Speaker Mode
Procedure
Step 1
Press and hold to activate the speaker.
Step 2
Dial the phone number.
Step 3
Press to place your call.
Step 4
Press and hold again to turn off speaker mode.
Related Topics
Handset, Headset, and Speakerphone, on page 107
Redial Number
Procedure
Press twice or choose Options > Redial.
Place Call with Existing Active Call (Same Line)
Procedure
Step 1
Choose Hold.
Step 2
Choose Options > NewCall.
You hear dial tone.
Step 3
Dial, redial, or speed dial a number.
Related Topics
Hold and Resume, on page 41
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
31
Calling Features
Place Call Using Speaker Mode

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g