Cisco 7925G User Manual

•
Canadian Standards Association (CSA) Division 2/Class 1 certification provides access to mobile
collaborative communications.
•
Industry-standard yellow styling offers fast recognition in emergency situations.
•
Ingress Protection 64 (IP 64) level protection, indicating dust-tight equipment which is protected against
splashing water.
•
The large 2-inch color (176 x 220 pixels) display makes viewing easy.
•
Resistance to damage from dropping the phone.
•
Tolerance of antibacterial and alcohol-based wipes.
•
Latex- and lead-free.
•
Shockproof and vibration-proof.
•
USB 1.1 interface.
ATEX Zone 2 certification: Zone 2 is defined as an area in which an explosive gas atmosphere is not
likely to occur in normal operation and if it does occur, is likely to do so only infrequently and will exist
for a short period only (for example, less than 10 hours per year).
Note
CSA Class 1 Division II certification: Class 1 is a location where a quantity of flammable gas or vapor
sufficient to produce an explosive or ignitable mixture may be present in the air. Division II is a location
where a classified hazard does not normally exist but is possible under abnormal conditions.
Note
In addition to basic call-handling features, your phone can provide enhanced productivity features that extend
your call-handling capabilities.
Depending on the configuration, your phone supports:
•
Use of Bluetooth wireless headsets, including certain hands-free call features
•
Wireless access to your phone number and the corporate directory
•
A local phone book that can store up to 200 contacts and speed-dial hot keys that can be assigned to
phone book contacts
•
Access to network data, XML applications, and web-based services
•
Online customizing of phone features and services from your User Options web pages
Potentially Explosive Environments
Your Cisco Unified Wireless IP Phone 7925G-EX is ATEX Zone 2 and CSA Class 1 Division II certified
equipment. This means the phone can be operated in an area in which an explosive gas atmosphere is not
likely to occur in normal operation and if it does occur, is likely to do so only infrequently and will exist for
a short period only (for example, less than 10 hours per year). The phone can also be operated in a location
where a quantity of flammable gas or vapor sufficient to produce an explosive or ignitable mixture may be
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
4
Features of Your Cisco Unified Wireless IP Phone
Potentially Explosive Environments

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g