Verify Conference Call Security
Procedure
Step 1
Look for the or icon after Conference on the phone screen. This icon indicates that the conference
is secure.
Step 2
Look for the or icon beside the participant’s name on the phone screen to see if the participant’s call
is secure.
End Participation in Conference
Procedure
Choose one of the following actions:
•
•
EndCall
•
Options > EndCall
The call disconnects from the conference.
Intercom Call
You can place an intercom call to a target phone that autoanswers the call in speakerphone mode with mute
activated. The one-way intercom call allows you to deliver a short message to the recipient. If the handset or
headset is in use, the recipient hears the audio. Any current call activity that your recipient is engaged in
continues simultaneously.
The target destination receives an intercom-alert tone and can then choose to:
•
Listen to the caller by selecting the intercom line with microphone muted (you can hear the caller, but
the caller cannot hear you).
•
End the intercom call by pressing the EndCall softkey. Do this if you do not want to hear the message.
•
Talk to the caller by selecting the intercom line, and use either the handset, headset, or speaker. The
intercom call becomes a two-way connection so that you can talk with the caller.
When using the intercom feature, be aware of the following:
•
From an intercom line, you can only dial other intercom lines.
•
You can use only one intercom line at a time.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
54
Calling Features
Verify Conference Call Security
To Next Page
Loading...
Need help?
General
Weight and Dimensions
