Cisco 7925G User Manual

• http://www.plantronics.com
• http://www.jabra.com
• http://www.jawbone.com
Secure Phone with Lock Set and CableLock
You can secure the phone to a desktop by ordering the lock set from Cisco. For more information, refer to
the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Accessory Guide.
The lock set does not include the cable lock.Note
Procedure
Step 1
Put the security cable around a post or through a hole in the desktop. Insert the loops at the ends of the security
cable through the C-ring.
Step 2
Insert the C-ring with cable loops through the slot on back of phone.
Step 3
Use the combination lock to secure the ends of the C-ring around cable loops and phone.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
27
Phone Installation
Secure Phone with Lock Set and CableLock

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g