Cisco 7925G User Manual

Redirect Call to Voicemail
The call can be automatically transferred to your voicemail. You can use iDivert with a call that is active,
ringing, or on hold.
Procedure
Choose Options > iDivert.
Call Forward
You can use the following Call Forward features to redirect incoming calls from your phone to another number:
Unconditional call forwarding (Call Forward All)
Applies to all calls that you receive.
Conditional call forwarding (Call Forward No Answer, Call Forward Busy, Call Forward No Coverage)
Applies to certain calls that you receive, according to conditions.
You can access Call Forward All on your phone or from your User Options web pages. Conditional call
forwarding features are accessible only from your User Options web pages.
When your phone is set up to Call Forward All, you see both of these indicators:
•
The icon next to the primary line.
•
The call forward target number in the status line.
Tips
•
Enter the call forward target number exactly as you would dial it from your phone. For example, enter
an access code or the area code, if necessary.
•
You can forward your calls to a traditional analog phone or to another IP phone, although your system
administrator might restrict the call forwarding feature to numbers within your company.
•
Call forwarding is phone line specific. If a call reaches you on a line on which call forwarding is not
enabled, the call rings as usual.
•
Your system administrator can enable a call forward override feature that allows the person receiving
your forwarded calls to reach you. With override enabled, a call placed from the target phone to your
phone does not forward, but rings through.
•
Your phone may reject your attempt to set up Call Forward All directly on the phone if the target number
that you enter would create a call forwarding loop or would exceed the maximum number of links that
are permitted in a call forwarding chain.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
46
Calling Features
Redirect Call to Voicemail

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g