Cisco 7925G User Manual

Related Topics
User Options, on page 125
Conference Calls
Your Cisco Unified IP Phone allows you to talk simultaneously with multiple parties in a conference call.
Conference Features
You can create a conference in various ways, depending on your needs and the features that are available on
your phone:
•
Conference: Allows you to create a standard (ad hoc) conference by calling each participant. Use the
Confrn softkey. Conference is available on most phones.
•
Join: Allows you to create a standard (ad hoc) conference by combining existing calls. Use the Join
softkey.
•
cBarge: Allows you to create a standard (ad hoc) conference by adding yourself to a call on a shared
line. Use the cBarge softkey. cBarge is available only on phones that use shared lines.
•
Meet Me: Allows you to create or join a conference by calling a conference number. Use the MeetMe
softkey.
Ad Hoc Conference
An Ad Hoc conference allows you to call each participant into a conference call. Most phones have the ability
to set up a conference call.
For more information, see Conference Participants List, on page 53.
Tips
•
Calls must be on the same line before you can add them to a conference. If calls are on different lines,
transfer them to a single line before using Confrn or Join.
•
Depending on how your phone is configured, if you leave a conference after initiating it, the conference
might end. To all the conference to continue, transfer the conference before hanging up.
Create Conference
Your system administrator determines whether noninitiators of a conference can add or remove participants.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
49
Calling Features
Conference Calls

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g