Cisco 7925G User Manual

Dial International Number
Procedure
Step 1
Press and hold .
The plus (+) symbol appears.
Step 2
Enter the phone number, including the country code, after the + symbol.
Step 3
Press or Options > Dial.
Advanced Call Options
You can place calls using special features and services that might be available on your phone. Contact your
system administrator for more information about these additional options.
Tips
You can see if a line associated with a speed-dial, call record, or directory listing is busy before placing a call
to that line. Look for line status indicators, as described in Line State (BLF), on page 65.
Place Speed Dial to Contact Number
Procedure
Perform one of the following actions:
•
Press and hold a speed-dial hot key for about 2 seconds.
If dialing a two-digit number, enter the first digit, then press and hold the second digit for about
2 seconds.
Note
•
Choose (Directory) > Speed Dials, highlight a speed dial, and press .
Related Topics
Internal Phone Book, on page 79
Speed Dial, on page 56
Dial Configured Speed-Dial Number
Use this procedure to dial a Line View speed-dial number, as set up on the web.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
33
Calling Features
Dial International Number

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g