Cisco 7925G User Manual

b) Use the keypad to enter digits, or press << to delete digits.
Step 6
Press Dial or .
Personal Directory
The Personal Directory feature set contains your Personal Address Book (PAB) and Fast Dials.
Personal Directory Setup with Cisco Unified Communications Manager Release 4.3 and Later
For information about how to set up and use the Personal Directory when connected to a Cisco Unified
Communications Manager Release 4.3 or later system, refer to Customizing Your Cisco IP Phone on the Web
at the following URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/products_user_guide_list.html
Personal Directory Setup with Cisco Unified Communications Manager Release 5.0 and Later
This section describes how to set up and use Personal Directory on your phone when you are connected to a
Cisco Unified Communications Manager Release 5.0 or later. Alternately, see Personal Directory on Web,
on page 130.
Tips
•
Your system administrator can provide the user ID and PIN that you need to log in to Personal Directory.
•
Personal Directory automatically logs you out after a certain amount of time. This time limit can vary.
Ask your system administrator for more information.
•
Use the numbers on your keypad to enter characters on your phone screen. Use the Navigation button
on your phone to move between input fields.
•
Your phone might be set up for international call logging, which is indicated by a plus (+) symbol on
the call logs, redial, or call directory entries. For more information, contact your system administrator.
Access Personal Directory (for PAB and Fast Dial Codes)
Procedure
Step 1
Choose > Directory Services > Personal Address Book (PAB) Service (exact name may vary).
Step 2
Enter your Cisco Unified Communications Manager user ID and PIN, and press Options > Submit.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
75
Call Logs and Directories
Personal Directory

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g