Cisco 7925G User Manual

Nonsecure call
At least one of the participating phones or the connection does not support these security features, or
the phones cannot be verified.
There are interactions, restrictions, and limitations that affect how security features work on your phone.
For more information, contact your system administrator.
Note
To determine whether secure calls can be made in your company, contact your system administrator.
Security Icons
The following table describes the security icons that display in the top right corner of the call activity area,
next to the call duration timer.
DescriptionIcon
Authenticated call or conference
Encrypted call or conference
Nonsecure callNo icon
When encrypted calling is configured on your phone, the Lock icon displays. However, the conversation is
protected only when the security tone plays at the beginning of a call, indicating that the call is protected on
both ends of the call. If your call is connected to a nonprotected phone, the secure tone does not play.
Suspicious Call Trace
If you are receiving suspicious or malicious calls, your system administrator can add the Malicious Call
Identification (MCID) feature to your phone. This feature enables you to identify an active call as suspicious,
which initiates a series of automated tracking and notification messages.
Notify System Administrator About Suspicious or Harassing Call
Procedure
If you are on a suspicious of harassing call, choose Options > MCID.
Your phone plays a tone and displays the message MCID successful. Your system administrator receives
information about the call.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
67
Calling Features
Security Icons

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g