Cisco 7925G User Manual

Use Speaker Mode
You can activate the speakerphone before making a call or during a call. The speaker mode remains active
for future calls until toggled off. You can activate the speakerphone (on the phone) even when the phone is
docked in the desktop charger and connected to a wired headset.
Procedure
Press and hold until the icon appears.
Switch To and From Speaker During Call
Procedure
Step 1
To switch to speaker mode, press and hold until the icon appears.
Step 2
To switch from speaker mode to handset mode, press and hold to toggle back to the handset.
Headsets
Your phone supports wired headset jack types with a 2.5 mm, 3-band, 4-connector plug. For information
about purchasing headsets, see Headset Information, on page 26.
Bluetooth Wireless Headsets
Your phone supports the use of Bluetooth wireless headsets. Enable the Bluetooth setting on your phone
before performing tasks such as scanning, pairing, and unpairing.
Before pairing the Bluetooth headset with the phone, follow the instructions in the headset documentation
to enable it for operation.
Note
Tips
•
Only one Bluetooth device can be connected to the phone at one time.
•
A Bluetooth device must remain within 10 m of the phone to keep the connection.
•
A Bluetooth device disconnects if the phone is turned off or if Bluetooth is disabled on the phone.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
109
Handset, Headset, and Speakerphone
Use Speaker Mode

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g