Cisco Nexus 7000 User Manual

B-1
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-07
APPENDIX
B
Transceivers and Module Connectors
This appendix specifies the transceivers and module connectors used with the Cisco Nexus 7000 Series
switches.
This appendix includes the following sections:
• 100-Gigabit CFP Transceivers, page B-1
• 40-Gigabit CFP Transceivers, page B-3
• 40-Gigabit QSFP Transceivers, page B-4
• 10-Gigabit SFP+ Transceivers and Fabric Extender Transceivers, page B-6
• 10-Gigabit X2 Transceivers, page B-10
• 1-Gigabit SFP Transceivers, page B-15
• RJ-45 Module Connectors, page B-19
100-Gigabit CFP Transceivers
The 100-Gigabit CFP transceivers are used with the M2-Series 100-Gigabit I/O module
(N7K-M202CF-22L).
Figure B-1 identifies the major features of these transceivers. For the cable specifications that apply to
these transceivers, see Table B-1. For the optical specifications, see Table B-2. For the environmental
specifications, see Table B-3.

Cisco Nexus 7000 Specifications

General

Chassis Type	Modular
Product Type	Switch
Power Supply	AC or DC
Cooling	Redundant, hot-swappable fan trays
Management	CLI, SNMP
Form Factor	Modular chassis
Interfaces/Ports	Varies by module
Product Series	Nexus 7000
Port Density	Varies by module
Redundancy	Power supply, fan, supervisor engine
Management Interfaces	Console, Ethernet
Security Features	ACLs, port security
Virtualization Support	VRF
Operating Temperature	0 to 40°C (32 to 104°F)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5% to 95% non-condensing