C-3
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-07
Appendix C Accessory Kits Contents
Cisco Nexus 7009 Switch Accessory and Optional Kits
• CAB-AC-2500W-ISRL—power cord, 250-VAC 16-A, Israel
• CAB-AC-2500W-US1—power cord, 250-VAC 16A, straight-blade NEMA 6
• CAB-AC-C6K-TWLK—power cord, 250-VAC 16A, twist lock, NEMA L6-20
• CAB-7513AC—power cord, AC 110V North America
• CAB-C19-CBN—cabinet jumper power cord, 250-VAC, 16A, C20C
• CAB-ACS-16—power cord, 16-A, Switzerland
• CAB-L520P-C19-US—NEMA L5-20 to IEC-C19 6ft US
Cisco Nexus 7009 Switch Accessory and Optional Kits
This section describes the contents of the Cisco Nexus 7009 accessory kits and the other kits that you
can order for the Cisco Nexus 7009 switch. The accessory kit is shipped with each Cisco Nexus 7009
chassis. You use that kit for mounting the front of the chassis on a four-post or two-post rack. If you are
centering the chassis on a two-post rack, you must also order the Cisco Nexus 7009 Center Mount Kit
(part number N7K-C7009-CMK). If you need to another bottom support bracket for front-mounting the
chassis, order the Cisco Nexus 7009 Bottom Support Kit (part number N7K-C7009-BSK). If you need
an additional set of brackets for mounting the front of the chassis to a rack, order the Cisco Nexus 7009
Rack Mount Kit (part number N7K-C7009-RMK).
This section includes the following topics:
• Cisco Nexus 7009 Accessory Kit, page C-3
• Cisco Nexus 7009 Center-Mount Kit, page C-5
• Cisco Nexus 7009 Bottom Support Kit, page C-6
• Cisco Nexus 7009 Rack-Mount Kit, page C-6
Cisco Nexus 7009 Accessory Kit
The Cisco Nexus 7009 Accessory Kit is shipped with each Cisco Nexus 7009 chassis. Table C-2 lists
and illustrates the contents for this kit.
To Next Page
Loading...
Need help?
General
