Cisco Nexus 7000 User Manual

F-2
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-07
Appendix F Site Preparation and Maintenance Records
Contact and Site Information
Contact and Site Information
Use the following worksheet (Table F-2) to record contact and site information.
Power evaluation:
•
Input power type
• Power receptacles
• Receptacle proximity to the equipment
• Dedicated (separate) circuits for power redundancy
• UPS for power failures
• Grounding: proper gauge wire and lugs
• Circuit breaker size
Grounding evaluation:
•
Data center ground
Cable and interface equipment evaluation:
•
Cable type
• Connector type
• Cable distance limitations
• Interface equipment (transceivers)
EMI evaluation:
•
Distance limitations for signaling
• Site wiring
• RFI levels
Table F-1 Site Planning Checklist (continued)
Planning Activity Verification Time and Date
Table F-2 Contact and Site Information
Contact person
Contact phone
Contact e-mail
Building/site name
Data center location
Floor location
Address (line 1)
Address (line 2)
City
State

Cisco Nexus 7000 Specifications

General

Chassis Type	Modular
Product Type	Switch
Power Supply	AC or DC
Cooling	Redundant, hot-swappable fan trays
Management	CLI, SNMP
Form Factor	Modular chassis
Interfaces/Ports	Varies by module
Product Series	Nexus 7000
Port Density	Varies by module
Redundancy	Power supply, fan, supervisor engine
Management Interfaces	Console, Ethernet
Security Features	ACLs, port security
Virtualization Support	VRF
Operating Temperature	0 to 40°C (32 to 104°F)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5% to 95% non-condensing