C-1
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-07
APPENDIX
C
Accessory Kits Contents
This appendix describes the contents of the Cisco Nexus 7000 Series accessory kits.
This appendix includes the following sections:
• Cisco Nexus 7004 Switch Accessory Kit, page C-1
• Cisco Nexus 7009 Switch Accessory and Optional Kits, page C-3
• Cisco Nexus 7010 Switch Accessory Kits, page C-7
• Cisco Nexus 7018 Switch Accessory Kits, page C-9
Cisco Nexus 7004 Switch Accessory Kit
This section describes the contents of the accessory kit that you can order for the Cisco Nexus 7004
switch. The accessory kit is shipped with each Cisco Nexus 7004 chassis. You use that kit for mounting
the chassis on a four-post or two-post rack. Typically, you mount the front of the chassis using the
front-mount brackets, which are already attached to the chassis, but if you need to mount the center of
the chassis, you use the center-mount brackets (order part number N7K-C7004-RMK), which you must
order separately. The kit also includes the screws, grounding lug, and other equipment that you use for
all installations of this chassis.
Table C-1 lists and illustrates the contents for this kit.
.
Table C-1 Cisco Nexus 7004 Switch Accessory Kit Contents
Illustration Description Quantity
Chassis mounting screws
• 12-24 x 3/4-in. Phillips screws
• M6 x 19 mm Phillips screws
10
10
RJ-45 rollover cable 1
196530
To Next Page
Loading...
Need help?
General
