Configuring QoS 163
8 Configuring Advanced Settings
Configuring QoS
Quality of Service (QoS) provides you with the ability to specify parameters on multiple
queues for increased throughput and better performance of differentiated wireless traffic like
Voice-over-IP (VoIP), other types of audio, video, and streaming media as well as traditional
IP data over the D-Link Unified Access System.
For detailed information about QoS and how it is used in the D-Link Unified Access System,
see Appendix D, “Understanding Quality of Service” on page 229.
Figure 74. QoS Configuration
Configuring QoS on the D-Link Unified Access System consists of setting parameters on
existing queues for different types of wireless traffic, and effectively specifying minimum and
maximum wait times (through Contention Windows) for transmission. The settings described
here apply to data transmission behavior on the access point only, not to that of the client
stations.
AP Enhanced Distributed Channel Access (EDCA) Parameters affect traffic flowing from the
access point to the client station. Station Enhanced Distributed Channel Access (EDCA)
Parameters affect traffic flowing from the client station to the access point.
NOTE:QoS is configured per radio interface.
To Next Page
Loading...
Need help?
General
