D-Link DWS-3024 User Manual

206 © 2001- 2008 D-Link Corporation. All Rights Reserved.
D-Link Unified Access System User Manual
Default Captive Portal Settings
Table 79 shows the default captive portal settings.
Virtual Access Point and Network Settings
Status VAP0 is enabled on both radios, all other VAPs
disabled
Network Name (SSID) Guest Network (VAP0)
VLAN 1
Hide SSID Disabled
L3 Tunnel Disabled
Security Mode Open System
MAC Authentication Disabled
RADIUS IP Address Use Profile (Global)
RADIUS Accounting Disabled
Other Settings
QoS Enabled
WMM Enabled
Table 79. Default Captive Portal Settings
Feature Default
Global Configuration
Operational Status Enabled
Additional HTTP Port None
Peer Switch Statistics Reporting
Interval
120 seconds
Authentication Session Timeout 600 seconds
CP Configuration
Status Enabled
Configuration Name None
Protocol Mode HTTP
Verification Mode Guest
User Group None
URL Redirect Mode Disabled
Session Timeout 0 (unlimited)
Idle Timeout 0 (unlimited)
Languages English
Table 78. AP Profile Default Settings
Feature Default

D-Link DWS-3024 Specifications

General

Brand	D-Link
Model	DWS-3024
Category	Switch
Language	English