182 © 2001- 2008 D-Link Corporation. All Rights Reserved.
D-Link Unified Access System User Manual
Specifically, this page indicates what services are provided through the CP to clients
connected on this interface. The list of services is determined by the interface capabilities.
Figure 86. Interface Capability Status
The drop-down menu contains all the physical interfaces and wireless interfaces available on
the switch. Physical (wired) interfaces are identified by the Port Description that includes slot
number, port number, and interface type. Wireless interfaces are identified by the wireless
network number and SSID. Use the drop-down menu to select the interface with the
information to display.
Table 67 describes the fields on the Interface Capability Status page.
Table 67. Interface and Capability Status
Parameter Description
Session Timeout Shows whether the interface supports client session timeout. This attribute is
supported on all interfaces.
Bytes Received
Counter
Shows whether the interface supports displaying the number of bytes
received from each client.
Bytes Transmitted
Counter
Shows whether the interface supports displaying the number of bytes
transmitted to each client.
Roaming Support Shows whether the interface supports client roaming. Only wireless
interfaces support client roaming.
Idle Timeout Shows whether the interface supports a timeout when the user doesn't send or
receive any traffic.
Packets Received
Counter
Shows whether the interface supports displaying the number of packets
received from each client.
Packets
Transmitted
Counter
Shows whether the interface supports displaying the number of packets
transmitted to each client.
To Next Page
Loading...
Need help?
General
