Viewing the Captive Portal Global Status 179
9 Configuring the Captive Portal
Viewing CP Activation and Activity Status
The CP Activation and Activity Status page provides information about each CP configured
on the switch.
Figure 84. CP Activation and Activity Status
The CP Activation and Activity Status page has a drop-down menu that contains all captive
portals configured on the switch. When you select a captive portal, the activation and activity
status for that portal displays.
Table 64. Global Captive Portal Status
Field Description
CP Global
Operational Status
Shows whether the CP feature is enabled.
CP Global Disable
Reason
If CP is disabled, this field indicates the reason for the CP to be disabled,
which can be one of the following:
• None
• Administratively Disabled
• No IPv4 Address
• Routing Enabled, But no IPv4 routing interface
This field does not appear if the CP operational status is Enabled.
CP IP Address Shows the captive portal IP address
Authenticated
Users
Shows the number of users currently authenticated to all captive portal
instances on this switch.
System Supported
Users
Shows the number of authenticated users that the system can support.
Configured
Captive Portals
Shows the number of captive portals configured on the switch.
Supported Captive
Portals
Shows the number of supported captive portals in the system.
Active Captive
Portals
Shows the number of captive portal instances that are operationally enabled.
To Next Page
Loading...
Need help?
General
