178 © 2001- 2008 D-Link Corporation. All Rights Reserved.
D-Link Unified Access System User Manual
2. Select the interface or interfaces from the Interface List. To select more than one interface,
hold the Ctrl key and click multiple interfaces.
3. Click Add.
NOTE:When you associate an interface with a captive portal, the interface is
removed from the Interface List. Each interface can be associated with only
one CP at a time.
Use the following steps to remove an interface from the Associated Interfaces list for a captive
portal.
1. Select the desired captive portal from the CP Configuration list.
2. In the Associated Interfaces field, select the interface or interfaces to remove. To select
more than one interface, hold the Ctrl key and click multiple interfaces.
3. Click Delete.
The interface is removed from the Associated Interface list and appears in the Interface
List.
Viewing the Captive Portal Global Status
The CP Global Status page contains a variety of information about the CP feature. From the
CP Global Status page, you can access information about the CP activity and interfaces.
To view captive portal status information, click Security > Captive Portal > Global Status.
Figure 83. Global Captive Portal Status
Table 64 describes the fields displayed on the CP Global Status page.
To Next Page
Loading...
Need help?
General
