Dahua NVR41-4KS2 Series User Manual

User's Manual
261
Parameter Description
PTZ Activation
Select the check box and click Setting to select the channel and PTZ
action. When an alarm occurs, the NVR device associates the channel to
perform the corresponding PTZ action. For example, activate the PTZ in
channel one to turn to the preset point X.
●
Tripwire alarm supports to activate PTZ preset point only.
●
You need to set the corresponding PTZ actions first, see "4.4.4 Calling
PTZ Functions".
Delay
At the end of the alarm, the recording extends for a period of time. The
time range is from 10 seconds to 300 seconds.
Tour
Select the check box and select the channel for tour. When an alarm
occurs, the local interface of the NVR device displays the selected channel
screen.
●
You need to set the time interval and mode for tour first, see "4.16.2
Tour".
●
After the tour is over, the preview interface is restored to the screen
split mode before the tour.
Log
Select the check box, the NVR device records the alarm information in the
log when an alarm occurs.
Voice Prompts
Check the box and then select the corresponding audio file from the
dropdown list. System plays the audio file when the alarm occurs.
Refer to "4.17.1 File Management" to add audio file first.
Buzzer Select the check box to activate the buzzer when an alarm occurs.
Step 4 Click
Apply
.
4.7.2.7.2 Queuing
Background Information
After connecting to the AI fisheye camera that supports the queuing function, system can realize the
corresponding linkage actions once the people amount in the queue or the waiting time has trigger
an alarm. Select a region first to set the corresponding actions. For the same line, the queue people
number alarm and queue time alarm has the same linkage actions.
Procedure
Step 1 Select
Main Menu
>
AI
>
Parameters
>
People Counting
>
Queuing
.
Step 2 The
Queuing
interface is displayed. See Figure 4-158.

Dahua NVR41-4KS2 Series Specifications

General

Brand	Dahua
Model	NVR41-4KS2 Series
Category	Network Hardware
Language	English