Dahua NVR41-4KS2 Series User Manual

User's Manual
377
4.14.2.2 802.1x
The device needs to pass 802.1x certification to enter the LAN.
Procedure
Step 1 Select
Main Menu
>
SECURITY
>
System Service
>
802.1x
.
The
802.1x
interface is displayed. See Figure 4-264
Figure 4-264
Step 2 Select the Ethernet card you want to certify.
Step 3 Select
Enable
and configure parameters. See Table 4-86.
Table 4-86 802.1x parameters
Parameter Description
Authentication
●
PEAP: protected EAP protocol.
●
TLS: Transport Layer Security. Provide privacy and data integrity
between two communications application programs.
CA Certificate
Enable it and click
Browse
to import CA certificate from flash drive. For
details about importing and creating a certificate, see "4.14.4 CA
Certificate".
Username The username shall be authorized at server.
Password Password of the corresponding username.
Step 4 Click
Apply
to complete the settings.

Dahua NVR41-4KS2 Series Specifications

General

Brand	Dahua
Model	NVR41-4KS2 Series
Category	Network Hardware
Language	English