User's Manual
319
Figure 4-206
Step 2 In the
Destination IP
box, enter the IP address.
Step 3 Click
Test
.
After testing is completed, the test result is displayed. You can check the evaluation for
average delay, packet loss, and network status.
4.10.4 Maintenance and Management
4.10.4.1 Device Maintenance
Background Information
When the Device has been running for a long time, you can configure the auto reboot when the
Device is not working. You can also configure the case fan mode to reduce noise and extend the
service life.
Procedure
Step 1 Select
Main Menu
>
MAINTAIN
>
Manager
>
Maintenance
.
The
Maintenance
interface is displayed. See Figure 4-207.
To Next Page
Loading...
Need help?
General
