Dahua NVR41-4KS2 Series User Manual

User's Manual
348
Parameter Description
Encryption Type
In the
Encryption Type
list, select an encryption type. The default setting
is CBC-DES.
Step 3 Compile the two MIB files by MIB Builder.
Step 4 Run MG-SOFT MIB Browser to load in the module from compilation.
Step 5 On the MG-SOFT MIB Browser, enter the Device IP that you want to manage, and then
select the version number to query.
Step 6 On the MG-SOFT MIB Browser, unfold the tree-structured directory to obtain the
configurations of the Device, such as the channels quantity and software version.
4.11.13 Multicast
Background Information
When you access the Device from the network to view the video, if the access is exceeded, the video
will not display. You can use the multicast function to group the IP to solve the problem.
Procedure
Step 1 Select
Main Menu
>
NETWORK
>
Multicast
.
The
MULTICAST
interface is displayed. See Figure 4-232.
Figure 4-232
Step 2 Configure the settings for the multicast parameters. See Table 4-76.
Table 4-76
Parameter Description
Enable Enable the multicast function.

Dahua NVR41-4KS2 Series Specifications

General

Brand	Dahua
Model	NVR41-4KS2 Series
Category	Network Hardware
Language	English