User's Manual
320
Figure 4-207
Step 2 Configure the settings for the system maintenance parameters. See Table 4-64.
Table 4-64
Parameter Description
Auto Reboot
In the
Auto Reboot
list, select the reboot time.
Case Fan Mode
In the
Case Fan Mode
list, you can select
Always run
or
Auto
. If you
select
Auto
, the case fan will stop or start according to the external
conditions such as the Device temperature.
This function is for some series products only, and it is only
supported on the local configuration interface.
Step 3 Click
Apply
to complete the settings.
4.10.4.2 Exporting System Settings
Background Information
You can export or import the Device system settings if there are several Devices that require the
same setup.
To Next Page
Loading...
Need help?
General
