MB95630H Series
284 FUJITSU SEMICONDUCTOR LIMITED MN702-00009-2v0-E
CHAPTER 16 LOW-VOLTAGE DETECTION RESET CIRCUIT
16.3 Pins
16.3 Pins
This section describes the pins of the low-voltage detection reset circuit.
■ Pins of Low-voltage Detection Reset Circuit
● V
CC
pin
The low-voltage detection reset circuit monitors the voltage of this pin.
● V
SS
pin
This is the GND pin serving as the reference for voltage detection.
● RST
pin
The low-voltage detection reset signal is output inside the microcontroller and to this pin.