Fujitsu 8FX User Manual

MB95630H Series
414 FUJITSU SEMICONDUCTOR LIMITED MN702-00009-2v0-E
CHAPTER 21 MULTI-PULSE GENERATOR
21.5 Operations
21.5.4.6 At One-shot Position Detection
The output timing change, which is triggered by the input pin SNIx for the one-
shot position detection, is shown in Figure 21.5-22.
■ When One-shot Position Detection
The operation of one-shot position detection is the same as that of the position detection,
except that after the first valid position is detected, no further position detection is recognized
until the operation mode is changed from one-shot position detection to another operation
mode. The OPTx output waveform is shown in Figure 21.5-22.
The reload timer is free to be used in this operation mode.
■ Timing Generated by One-shot Position Detection (OPS[2:0] = 0b110)
Figure 21.5-22 Timing Generated by One-shot Position Detection (OPS[2:0] = 0b110)
OP0[1:0]
(OPDLR)
PPG
OPT0
0b00 0b01
0b1100b100
WTO
RDA[2:0]
(OPDUR)
SNI0
WTIN1
SNI1
SNI2
0b11
0b110 0b010
OPS[2:0]

Fujitsu 8FX Specifications

General

Brand	Fujitsu
Model	8FX
Category	Computer Hardware
Language	English