Fujitsu 8FX User Manual

MB95630H Series
MN702-00009-2v0-E FUJITSU SEMICONDUCTOR LIMITED 557
CHAPTER 26 DUAL OPERATION FLASH MEMORY
26.5 Programming/Erasing Flash Memory
26.5.6 Resuming Sector Erase of Flash Memory
This section explains the procedure for entering the sector erase resume
command to resume suspended erasing of a sector in the Flash memory.
■ Resuming Sector Erase of Flash Memory
• To resume suspended sector erase, send the sector erase resume command mentioned in the
command sequence table from the CPU to the Flash memory.
• The sector erase resume command resumes a sector erase operation suspended by the sector
erase suspend command. The sector erase resume command is executed by writing erase
resume code (0x30). Specify an address in the sector selected to be erased.
• A sector erase resume command input during sector erase is ignored.

Fujitsu 8FX Specifications

General

Brand	Fujitsu
Model	8FX
Category	Computer Hardware
Language	English