4 INSTALLATION, COMMISSIONING AND SERVICING
4.1 LIFTING HAZARDS
Many injuries are caused by:
● Lifting heavy objects
● Lifting things incorr
ectly
● Pushing or pulling heavy objects
● Using the same muscles repetitively
Plan carefully, identify any possible hazards and determine how best to move the product. Look at other ways of
moving the load to avoid manual handling. Use the correct lifting techniques and Personal Protective Equipment
(PPE) to reduce the risk of injury.
4.2 ELECTRICAL HAZARDS
Caution:
All per
sonnel involved in installing, commissioning, or servicing this equipment must be
familiar with the correct working procedures.
Caution:
Consult the equipment documentation befor
e installing, commissioning, or servicing
the equipment.
Caution:
Alw
ays use the equipment as specified. Failure to do so will jeopardise the protection
provided by the equipment.
Warning:
R
emoval of equipment panels or covers may expose hazardous live parts. Do not touch
until the electrical power is removed. Take care when there is unlocked access to the
rear of the equipment.
Warning:
Isolat
e the equipment before working on the terminal strips.
Warning:
Use a suitable pr
otective barrier for areas with restricted space, where there is a risk of
electric shock due to exposed terminals.
Caution:
Disconnect pow
er before disassembling. Disassembly of the equipment may expose
sensitive electronic circuitry. Take suitable precautions against electrostatic voltage
discharge (ESD) to avoid damage to the equipment.
Chapter 2 - Safety Information P54A/B/C/E
18 P54xMED-TM-EN-1
To Next Page
Loading...
Need help?
General
