MAINTENANCE
7-95
Clean Cab Floor
--- as required
IMPORTANT: Only the cab floor can be washed with
water. Take care not to splash other parts of the cab
with water. Do not increase the water pressure speed
by squeezing the hose end. Never use steam to clean
the cab floor. Always clean the cab floor only after
closing ducts (1, 2, and 3) to prevent water from
entering the ducts (1, 2, and 3).
1. Parkthemachinefollowingthesameproceduresas
describedonpage7-6forpreparationforinspectionand
maintenance.
2. Sweepthecabfloorcleanusingabrush,andbrushdust
fromthecabfloorwhilesprayingwater.(Sweepoutthe
mud and dust with a brush as much as possible before
applying water.)
3. Whencleaningthefloormat,sweepdust(water)along
the grooves on the floor mat.
4. Whencleaningthecabfloorwiththefloormatremoved,
removeonlyrearmat.Thensweepthedustand/orwater
through one cleaning hole.
1 2 3
MADB-07-044