Hitachi ZAXIS 30U-5N User Manual

OPERATOR'S STATION
1-15
Hour Meter
Total (accumulated) machine operation hours counted since
themachinestartedworking,aredisplayedintheunitof
HOUR(h).Onedigitafterthedecimalpointindicatestenths
ofanhour(6minutes).
Clock
Indicatesthepresenttime.24h/12h/Nodisplaycanbe
selected.
(Referto"Clock"forswitchingthedisplaymode.)
Fuel Gauge
Indicatestheremainingfuelamount.Refuelbeforethe
indicatorsegmentreaches"E".Whenthefuelsensorcircuit
isbrokenorshort-circuited,allsegmentsofthefuelgauge
will flash.
IMPORTANT: If all segments flash, the machine is
abnormal. Immediately consult your authorized
Hitachi dealer.
Coolant Temperature Gauge
Indicates the engine coolant temperature. Normally the
segment shows around the center of the scale during
operation. All segments will flash when the coolant
temperature sensor malfunctions or the CAN data can not
be received.
f
NOTE: 20 When the coolant temperature is 20° or lower, the
bottom segment will flash.
IMPORTANT: If all segments flash, the machine is
abnormal. Immediately consult your authorized
Hitachi dealer.
Operating Status Icon Display
Displaysiconsindicatingcurrentstatusoftravelmode(1),
worklight(2),mufflerfilter(3)(ZX50U-5N,60USB-5N)and
autoshut-down(4)selectedbytheswitchpanel.
MADG-01-091
MADM-01-016
MADM-01-017
MADM-01-014
MADM-01-015
31 42

Hitachi ZAXIS 30U-5N Specifications

General

Brand	Hitachi
Model	ZAXIS 30U-5N
Category	Excavators
Language	English