Chapter 3 — Connect the Printer
PD43 and PD43c Commercial Printer User Manual 87
Configure Wi-Fi Communications from the Printer
Web Page
You can use the printer web page to configure wireless
communications on the printer.
1 On your PC, open a browser.
2 In the Location or Address bar, type the printer IP address and
press Enter. The printer web page appears.
3 Click Login. The Login page appears.
4 Type your Username and Password and click Login. The default
username is itadmin and the default password is pass.
5 Click the Configure tab.
6 Click Communications > Wireless 802.11. The Wireless 802.11
page appears.
7 Change settings as needed, or click Default Settings to restore all
default Wireless 802.11 settings.
8 Click Save when you are done.
Note: To configure the printer from the web page, the printer must be
turned on and connected to your Wi-Fi or Ethernet network.
To Next Page
Loading...
Need help?
General