Chapter 1 — About the Printers
PD43 and PD43c Commercial Printer User Manual 23
The printer command language is saved to memory, and remains set to
ESim/ZSim until you change this setting.
How to Set the Printer Command Language
You can use one of these methods to change the printer command
language:
• Printer web page
• Main Menu
• PrintSet 5. For more information, see the PrintSet 5 online help.
Set the Command Language from the Printer Web
Page
To set the command language from the printer web page, you need to
turn on the printer and connect to your Ethernet or Wi-Fi network.
1 Make sure that the printer has media and ribbon (if necessary)
installed.
2 On your PC, open a browser.
3 In the Location or Address bar, type the printer IP address and
press Enter. The printer web page appears.
4 Click Login. The Login page appears.
5 Type your Username and Password and click Login. The default
username is itadmin and the default password is pass.
6 Click the Configure tab.
7 Click System Settings > General.
8 Select a different printer command language from the Command
Language list, and then click Save.
9 Click the Services tab.
10 Click Reboot Printer, and then click Reboot. The printer restarts
in the command language you selected.
To Next Page
Loading...
Need help?
General