Chapter 5 — Troubleshoot the Printer
PD43 and PD43c Commercial Printer User Manual 123
About Alerts
To help maintain the printer, you can configure the printer to send
alert messages when certain conditions occur. For example, the printer
can send a message when the odometer reaches a certain value, or if the
printhead is lifted during printing.
There are three types of alerts:
• Error alerts
• Information alerts
• Warning alerts
You configure alert settings in the printer web page. Alert messages can
be sent to an email address, an SNMP trap, or both. You can enable or
disable each type of alert, set the number of times the alert is repeated,
set the unit of measure that determines how often the alert is sent, and
change the default text message for the alert.
Configure Alerts
This section explains how to configure alerts and alert messages. You
configure alert settings from the printer web page.
1 On your desktop PC, start a browser.
2 In the Location or Address bar, type the printer IP address and
press Enter. The printer web page appears.
3 Click Login in the upper right corner of the screen. The Login page
appears.
4 Type your Username and Password in the entry fields, and then
click Login.
Note: To configure the printer from its web page, the printer must be
turned on and connected to your Wi-Fi or Ethernet network.
To Next Page
Loading...
Need help?
General