Honeywell Intermec PD43 User Manual

Chapter 2 — Set Up the Printer
70 PD43 and PD43c Commercial Printer User Manual
Print a Test Label in Idle Mode
You can print a test label when the printer is in Idle mode.
1 Make sure that the printer has media and ribbon (if necessary)
installed.
2 On the icon printer, press and hold until the test label starts to
print.
On the LCD printer, press and hold until the Media
Calibration Wizard appears. To print a label with the current print
settings, select and press .
Print a Test Label from the Main Menu
If you have an LCD printer, you can print a test label from the Main
Menu.
1 Make sure that the printer has media and ribbon (if necessary)
installed.
2 From the Ready screen, press .
3 Press to select Tools and then press . The Tools menu appears
with Test Labels selected.
4 Press .
5 Select Print Quality, Printer Information, or Printer Settings,
and then press . A list of available labels appears.
6 Select a label to print, and then press .
Test Labels
Print Quality
Resources
Printer Information
Printer Settings

Honeywell Intermec PD43 Specifications

General

Brand	Honeywell
Model	Intermec PD43
Category	Printer
Language	English