Chapter 1 — About the Printers
24 PD43 and PD43c Commercial Printer User Manual
Set the Command Language from the Main Menu
If you have an LCD printer, you can change the printer command
language from the Main Menu.
1 Make sure that the printer has media and ribbon (if necessary)
installed.
2 From the Ready screen, press . The Main Menu appears.
3 In the Main Menu, select Settings > System Settings > General.
4 In the General settings list, press to scroll to Command
Language.
5 Press or to select a different command language.
6 Press or .
7 Press to save your changes.
If you are prompted to enter a password for DSim or ZSim, the
password is 1138. To return to the Fingerprint menu system from
DSim or ZSim, the password is 8311.
Set the Command Language with the Print Button
If you have an icon printer, you can use the Print button to set the
printer command language.
1 Make sure that the printer has media and ribbon (if necessary)
installed.
2 Turn off the printer.
3 Turn the printer back on. All the LEDs light up. As the printer
starts up, the LEDs turn off one by one, starting with the bottom
right LED.
4 When the last two LEDs (Maintenance and Bluetooth) are lit, press
and hold . The printer feeds a few labels as it automatically
adjusts the media feed, and then the test labels start to print.
5 Continue to hold . The available printer command languages
start to print.
To Next Page
Loading...
Need help?
General