Chapter 3 — Connect the Printer
90 PD43 and PD43c Commercial Printer User Manual
Configure Bluetooth Communications from the Main Menu
This section explains how to configure Bluetooth settings from the
printer Main Menu. You may need to configure these settings if you
want to connect to a mobile computer through Bluetooth.
1 From the Ready screen, press . The Main Menu appears.
2 Select Settings > Communications > Bluetooth.
3 Change settings as needed for your Bluetooth device.
4 When you are finished, save your changes and restart the printer.
Configure Bluetooth Communications from the Web Page
Use this procedure to configure Bluetooth from the printer web page.
The printer must be connected to an Ethernet or wireless network and
you must know the printer IP address.
1 On your PC, start a browser.
2 In the Location or Address bar, type the printer IP address and
press Enter. The printer web page appears.
3 Click Login. The Login page appears.
4 Type your Username and Password and then click Login. The
default value for Username is itadmin and the default value for
Password is pass.
5 Click the Configure tab. The Configuration Summary page
appears.
6 Click Communications > Bluetooth. The Bluetooth settings page
appears.
7 Change Bluetooth settings as needed. You can also click Default
Settings to restore all default Bluetooth settings.
8 Click Save when you are finished.
To Next Page
Loading...
Need help?
General